Winch

Rope winch is used together with vertical core drill rig to conduct geological exploration. It helps to draw and lower the core bits inner tube assembly, and logging instruments. Our products are precise, compact with easy-operation, low noise and wearing.

Main Component of Rope winch

Clutch, gear box, coiling block, steel wire rope, brake handle and speed-controlling handle

Feature

1. Rope winch can be equipped with electromotor and diesel engine.
2. The power output shaft of gear box is also known as coiling block shaft, and the gear box is a support base of power output shaft, which makes transition more smoothly. It is also easy to install and dissemble diesel engine.
3. The core-filled inner tube assembly should be lifted through salvage by using rope winch and take out the core.
4. When little or no water exists in core drill, the core drill should not be dropped from the orifices. It is necessary to hang the double tube assembly with rope winch and decelerate to the bottom of the hole.

Maintenance of our product

1. The rotating part should be refueled at regular intervals.
2. Steel wire rope is needed to clean and oil after being used for a period of time.
3. The max rated hoist power of steel wire rope is 6600N, and overload is prohibited.
4. Check the control crank regularly.

Technical Parameters

Diesel Engine	Type	S195
	Power	8.8KW
	Rotate Speed	650r/min, 325 r/min, 235r/min
Drilling Capability	Length of rope	3000m (Φ8mm)
	Length of rope	2000m (Φ6mm)
	Length of rope	1500m (Φ5.1mm)
	Length of rope	1000m (Φ5.1mm)
Others	Total Weight	800kg
	Overall Dimension(L×W×H)	1450×700×850mm